Dual Band Mobile Phone Signal Booster for 3G-4G (SR-DW60) for all Malaysia and Singapore 3G network and support Maxis, Celcom, Digi, Singtel, Starhub 4G network (Area Specific).
SR-DW60 Dual Band Mobile Phone Signal Booster for 3G-4G
The SR-DW60 Dual Band Mobile Phone Signal Booster for 3G-4G captures and boosts a weak mobile signal through a Panel or high gain log periodic antenna and amplifier.
This Mobile Phone Signal Booster for 3G-4G can boost coverage for areas up to 100 square meters. The SR-DW60 Dual band Mobile Phone Signal Booster for 3G-4G improve All Telco 3G network as well as Maxis/Celcom/Digi 4G network in some area (Call to confirm), and provides signal coverage for your home, office, warehouse or facility.
SR-DW60 dual band Mobile Phone Signal Booster for 3G-4G package include everything you need to increase signal strength and avoid dropped calls.
Improve Data Communication for Maxis, Celcom, Digi 4G network in some area and 3G Data/Voice communication for all Malaysia and Singapore 3G network.
The Dual Band Mobile Phone Signal Booster for 3G-4G Package Works with the following Networks:
- MAXIS (4G, 3G)
- CELCOM (4G, 3G)
- U MOBILE (3G)
- DIGI (4G, 3G)
- SINGTEL (4G, 3G)
- STARHUB (4G, 3G)
- M1 (4G, 3G)
Standard Booster Package include:
- 1 x Dual Band Mobile Phone Signal Booster for 3G-4G unit
- 1 x Outdoor Antenna with 5 Meter Cable
- 1 x Indoor Antenna
- 1 x Power Adapter
- 1 x Instruction Manual
- 1 Year Warranty
- 30 Day Money Back Guarantee
Standard Dual Band Mobile Phone Signal Booster for 3G-4G Package Image:
Outdoor Antenna :
Panel Antenna – Ideal for most properties with acceptable outdoor signal. Suitable to mount on pole, concrete wall, wood, or window railing.
High Gain Log Periodic Antenna – High gain directional antenna that can receive wide frequency band, suitable to mount on a pole. Upgrade to this antenna for better signal performance.
Optional Extension Cable:
The outdoor antenna cable is 5m as included in standard package, this may not be enough for some case. Fortunately, the extension cables of 5m, 10m, 15m and 20m are available, please estimate the distance between outdoor antenna and booster and purchase the extension cable accordingly.
The booster package could function well without any other accessories. However, you could improve the indoor signal coverage with the purchase of indoor omni-directional ceiling antenna, power splitter and etc. Please visit to the link Mobile Booster Selection Guide if you would like to have more information regarding accessories that could help to improve your booster performance.
What is AGC function ?
AGC means Automatic Gain Control; it means the booster can control the gain by itself according to the surroundings. When there is a sudden strong signal input, the booster can adjust the gain accordingly to protect the booster module and make sure the strong signal will not affect the base station signal.
When the signal outside is too weak, the booster can adjust the gain to maximum to boost the signal received at most for end user.
The AGC repeater come with LED indicators, it can show the running state of the booster, in case the booster and antenna installation is not right that cause loop oscillation, the LED light will indicate to user so user would be able to known and adjust the installation setup accordingly to avoid loop oscillation issue.
What is Auto Shut Down Function?
When the installation is not right that cause bad loop oscillation, the signal emit from the booster and antenna may jam the base station signal and affect to other users. Auto shut down function is to shut down the booster automatically when deep loop oscillation is detected to avoid jamming the tower and save your trouble from operators.
Gain: Uplink Gp≥55dB ,Downlink Gp≥60dB
Pass band ripple ≤5dB
Guard band rejection (BW-60dB)≤42MHz, (BW-70dB)≤45MHz
I/O impedance 50Ω /N connector
I/O return loss ≤-8dB
Export power (Po) ≥14dBm
Intermodulation Attenuation: ≤-40dBc (Po=13dBm)
Transmission Delay ≤0.5μs
Ambient temperature -10°C – 50°C
Power supply AC110- 220V + – 10%