MyMB Smart Home Wireless Magnetic Door Sensor
[ This Items must use together with MyMB Smart Home HD IP Camera (1080P) or MyMB Smart Home Wireless Auto Security Alarm Siren]
MyMB Smart Home Wireless Magnetic Door Sensor use low power design, when the door is closed, the sensor do not emit any wireless signal and power consumption is only few micro ampere, it could be use for door or window. When the sensors are separated by 2 ~ 3 cm and above, MyMB Smart Home Wireless Magnetic Door Sensor will emit alarm signal for about 1 second and stop the transmission, and this 1 second of alarm signal will be enough for the receiver (i.e MyMB Smart Home HD IP Camera (1080P) ) to receive and process it accordingly.
- Long distance transmission
- Low power consumption, battery could last for 3 years and is replaceable.
- Built in microprocessor and digital control mechanism.
- Install the battery, use the provided double side tape to stick the sensors on door and door frame respectively, in normal situation, the separation must be shorter than 15mm.
- Open the door, you should see a red led light alarm signal, check the receiver status (i.e MyMB Smart Home HD IP Camera (1080P) ) to make sure it is working correctly.
- Operating Voltage: DC 5V
- Standby Current: 10uA
- Alarm Current: < 15mA
- Operating Frequency: 433MHz
- Transmission mode: ASK
- Transmission Power: <150mW
- Operating Temperature: -10 ~ 50 c