My Mobile Booster (MyMB) supply all kind of accessories used for mobile signal booster system. All accessories have 50 Ohms characteristic impedance that match to our booster system and provide the best optimum results. The connector for all accessories are mostly N-Type and SMA type, we have all kind of adapter and there is always a way to connect the booster system. Please check the list below for more accessories information.
MyMB Panel Antenna :
MyMB Panel Antenna is a wide band directional antenna that has wider reception angle compared to Yagi Antenna. Select this if outdoor signal is acceptable. It could be installed on a pole, concrete wall, wooden structure or Window railing. It is suitable to use for any booster.
MyMB Yagi Antenna :
MyMB Yagi Antenna is single band directional antenna that needs to be pointed to base station for best reception. Select this when outdoor signal is very weak. Install on rooftop. It could be mounted on the pole for TV antenna. Unlike Panel or Log periodic antenna, Yagi antenna only support single frequency band, it is suitable to use for single band booster only.
MyMB High Gain Log Periodic Antenna :
MyMB High gain log periodic antenna is a wide band direction antenna that gathers the strength of both Yagi and Panel Antenna. Its “fish bone” antenna structure is hidden inside the high quality plastic cover to protect it from deformation under bad outdoor environment. Upgrade to this antenna for better system performance. Install on rooftop. It could be mounted on the pole for TV antenna. It is suitable to use for any booster.
MyMB Outdoor Omni-Directional Antenna :
MyMB High gain Omni-Directional antenna is a wide band antenna that receive/emit signal from/to all direction. In certain case such as marine application, Omni-directional antenna is needed. For example, if the booster system is installed on ship or vessel, it is impossible to use directional antenna to always point to base station as the ship keep moving, in this case outdoor Omni-directional antenna is needed.
MyMB Omni-Directional Magnetic Sucker Antenna :
The Magnetic Sucker antenna is an omni-directional antenna, it could be use as indoor and/or outdoor antenna, the gain is lower as compare to other outdoor antenna but the main advantage is it could be sucked on metal surface such as aircon compressor etc, so the installation is easier compare to other outdoor antenna type which may need drilling work. It comes with 3 meter coaxial cable and could connect to booster directly, the cable diameter is small and could sneak through the window easily.
MyMB Indoor Ceiling / TableTop Antenna :
The normal indoor ceiling antenna could be mount on false or plaster ceiling, we also supply indoor dome antenna that could be mount on concrete ceiling or place at tabletop directly.
MyMB Indoor Panel Antenna :
MyMB Indoor Panel antenna is a directional antenna, it could be mounted on wall. It is suitable to provide coverage for rectangular shape area like corridor or room. As the outdoor antenna is usually directional antenna, by using indoor directional antenna and install the indoor and outdoor antenna at opposite direction could provide a better isolation and improve the booster system performance.
MyMB Indoor Whip Antenna :
Power Divider :
A power divider divide the booster output power. It allows connection of multiple indoor antennas to enlarge indoor coverage area.
MyMB Two Way Power Splitter:
MyMB Three Way Power Splitter:
MyMB Four Way Power Splitter:
Cable and Connectors :
MyMB Low Loss Signal Cable with Connectors :
Available cable length : 5m, 10m, 15m, 20m, 30m, 40m
MyMB Super Low Loss Signal Cable:
MyMB Super Low Loss Signal Cable is 50 Ohms low loss cable normally used for MR or LR Series booster system, the signal loss is lower than MyMB Low Loss Signal Cable cable, the cable connector is not pre-assembled so every cable length is flexible and contractor could lay the cable first and make the connector on customer site.
Available cable length: 50m, 100m, 200m
Cable Crimp Connector :
Please check the video on how to assemble a crimp connector.
Crimping Tools for Cable Crimp Connector :
Crimping die size : 0.429″(10.9mm) and 0.128″(3.25mm)
Cable Clamp Connector :
Connector & Adapter :
N Male to N Male Adapter :
If you have a N Female connector and wish to convert to N Male type.
N Female to N Female Adapter :
If you have a N Male connector and wish to convert to N Female type.
N Male to SMA Male Adapter :
If you have a N Female connector and wish to convert to SMA Male type.
If you have a SMA Female connector and wish to convert to N Male type.
N Male to SMA Female Adapter :
If you have a SMA Male connector and wish to convert to N Male type.
N Female to SMA Male Adapter :
If you have a SMA Female connector and wish to convert to N Female type.
N Female to SMA Female Adapter :
If you have a SMA Male connector and wish to convert to N Female type.
Antenna Bracket :
Concreate Ceiling Mount U-Bracket for ceiling Antenna :
Wall Mount L Pole Bracket for Outdoor Antenna (More Details) :